MCQ
A polariser is used to :
- Aincrease intensity of light
- Breduce intensity of light
- Cproduce polarised light
- Dproduce unpolarised light
✓
Answer
C. produce polarised light
Explanation:
Polariser is used in producing polarised light.
Explanation:
Polariser is used in producing polarised light.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
$M{L^3}{T^{ - 1}}{Q^{ - 2}}$ is dimension of
→Two unequal masses are connected on two sides of light string passing over a light and smooth pulley as shown in the figure. The system is released from rest. The larger mass is stopped $1\, sec$ after the system is set into motion and then released. The time elapsed before the string is tight again $(g = 10\, m/sec^2)$
→A student plots a graph from his reading on the determination of Young’s modulus of a metal wire but forgets to label. The quantities on $X$ and $Y$ axes may be respectively.
→The field due to a magnet at a distance $ R$ from the centre of the magnet is proportional to
→A long solenoid of length $L$ has a mean diameter $D$. It has $n$ layers of windings of $N$ $turns$ each. If it carries a current ‘$i$’ the magnetic field at its centre will be
→A ball is thrown up vertically with a certain velocity so that, it reaches a maximum height $h$. Find the ratio of the times in which it is at height $\frac{ h }{3}$ while going up and coming down respectively.
→Radon $({R_n})$ decays into Polonium (${P_0}$) by emitting an $\alpha - $ particle with half-life of $4\, days$. A sample contains $6.4 \times {10^{10}}$ atoms of $R_n$. After $12\, days$, the number of atoms of ${R_n}$ left in the sample will be
→In the given figure, the energy levels of hydrogen atom have been shown along with some transitions marked $A. B, C. D$ and $E.$ The transitions $A , B$ and $C$ respectively represent
→A letter $A$ is constructed of a uniform wire with resistance $1.0\,\Omega \,per\,cm$. The sides of the letter are $20\, cm$ and the cross piece in the middle is $10\, cm$ long. The apex angle is $60^o$. The resistance between the ends is .............. $\Omega$
→An object is located at $2\, km$ beneath the surface of the water. If the fractional compression $\frac{\Delta V }{ V }$ is $1.36\, \%,$ the ratio of hydraulic stress to the corresponding hydraulic strain will be ......... . [Given : density of water is $1000\, kg m ^{-3}$ and $\left. g =9.8 \,ms ^{-2} .\right]$
→