Question
A spherical shell made of plastic, contains a charge Q distributed uniformly over its surface. What is the electric field inside the shell? If the shell is hammered to deshape it without altering the charge, will the field inside be changed? What happens if the shell is made of a metal?

Answer

As the shell is made of plastic, it is non-conducting. But as the charge is distributed uniformly over the surface of the shell, the sum of all the electric field vectors at the centre due to this kind of distribution is zero. But when the plastic shell is deformed, the distribution of charge on it becomes non-uniform. In other words, the sum of all the electric field vectors is non-zero now or the electric field exists at the centre now.
In case of a deformed conductor, the field inside is always zero.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A person standing on the top of a cliff $171ft$ high has to throw a packet to his friend standing on the ground $228ft$ horizontally away. If he throws the packet directly aiming at the friend with a speed of $15.0ft/s$, how short will the packet fall?
A wheel of mass 10kg and radius 20cm is rotating at an angular speed of 100rev/min when the motor is turned off. Neglecting the friction at the axle, calculate the force that must be applied tangentially to the wheel to bring it to rest in 10 revolutions.
What is meant by the term 'Molar specific heat of a gas? The molar specific heat of hydrogen in the temperature range of about 250K to 750K is about $\Big(\frac52\Big)\text{R}.$ At lower temperatures, the value of molar specific heat of hydrogen decreases to the value typical of monoatomic gases $\Big(\frac32\Big)\text{R}$ while at higher temperatures, it tends to the value $\Big(\frac72\Big)\text{R.}$ Explain.
On what factors does the magnitude of heat flow from hot surface to cold surface depends? How?
A bulb rated 60W at 220V is connected across a household supply of alternating voltage of 220V. Calculate the maximum instantaneous current through the filament.
Consider the circular motion of the earth around the sun. Which of the following statements is more appropriate?
  1. Gravitational attraction of the sun on the earth is equal to the centripetal force.
  2. Gravitational attraction of the sun on the earth is the centripetal force.
Show that there are two values of time for same height during the course of flight of a projectile and the sum of these times is equal to the total time of flight.
Find the centre of mass of a triangular lamina.
What is the temperature of the steel-copper junction in the steady state of the system shown in Fig. 10.15. Length of the steel rod $=15.0 cm$, length of the copper rod $=10.0 cm$, temperature of the furnace $=300^{\circ} C$, temperature of the other end $=0{ }^{\circ} C$. The area of cross section of the steel rod is twice that of the copper rod. (Thermal conductivity of steel $=50.2 J s ^{-1} m ^{-1} K ^{-1}$; and of copper $\left.=385 J s ^{-1} m ^{-1} K ^{-1}\right)$.
Image
A stone dropped from the top of a tower of height 300 m splashes into the water of a pond near the base of the tower. When is the splash heard at the top given that the speed of sound in air is $340 m s ^{-1} ?\left(g=9.8 m s ^{-2}\right)$