MCQ
A transistor is operating in the active mode. $v_1$ is potential barrier across base emitter junction and $v_2$ is potential barrier across collector base junction. $b_1$ is width of depletion layer of base emitter junction and $b_2$ is width of collector base junction.
  • A
    $v_1 > v_2, b_1 > b_2$
  • B
    $v_1 < v_2, b_1 < b_2$
  • $v_1 > v_2, b_1 < b_2$
  • D
    $v_1 < v_2, b_1 > b_2$

Answer

Correct option: C.
$v_1 > v_2, b_1 < b_2$
c

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Frequency of $L-C$ circuit is $f_{1} .$ If a resistance $R$ is also added to
it, the frequency becomes $f_{2}$. The ratio of $\frac{f_{2}}{f_{1}}$ will be
Radius of central zone of circular zone plate is $2.3\,mm.$ Wavelength of incident light is $5893\,\,Å.$ Source is at a distance of $6\,m.$ Then the distance of first image will be.....$m$
A body of mass $‘m’$ is dropped from a height of $‘h’$. Simultaneously another body of mass $2m$ is thrown up vertically with such a velocity $v$ that they collide at the height $h/2$. If the collision is perfectly inelastic, the velocity at the time of collision with the ground will be :
Resistance of $100\, cm$ long potentiometer wire is $10 \,\Omega$, it is connected to a battery ($2\, volt$) and a resistance $R$ in series. A source of $10\, mV$ gives null point at $40\, cm$ length, then external resistance $R$ is ........... $\Omega $
A sonometer wire oflength $1.5\ m$ is made of steel. The tension in it produces an elastic strain of $1 \%$. What is the fundamental frequency of steel if density and elasticity of steel are $7.7 \times 10^3 $ $kg/m^3$ and $2.2 \times 10^{11}$ $N/m^2$ respectively?
The direction of magnetic force on the electron as shown in the diagram is along
Half mole of an ideal monoatomic gas is heated at constant pressure of $1\, atm$ from $20\,^oC$ to $90\,^oC$. Work done by has is close to ..... $J$ (Gas constant $R = 8.31\, J/mol.K$)
A parallel plate capacitor of plate separation $2\, mm$ is connected in an electric circuit having source voltage $400\, V$. if the plate area is $60$ $cm^2$, then the value of displacement current for ${10^{ - 6}}\,\sec $ will be
The resolving power of an astronomical telescope is $0.2\, sec$. If the central half portion of the objective lens is covered, the resolving power will be....$sec$
Out of the following functions representing motion of a particle which represents $SHM$ 

$(A)\;y= sin\omega t-cos\omega t$

$(B)\;y=sin^3\omega t$

$(C)\;y=5cos\left( {\frac{{3\pi }}{4} - 3\omega t} \right)$

$(D)\;y=1+\omega t+{\omega ^2}{t^2}$