MCQ
An AC current is given by $I=I_1 \cos \omega t+I_2 \sin \omega t$. The root mean square current is
  • A
    $\frac{I_1+I_2}{\sqrt{2}}$
  • B
    $\frac{\left(I_1+I_2\right)^2}{2}$
  • $\sqrt{\frac{I_1^2+I_2^2}{2}}$
  • D
    $\sqrt{\frac{I_1^2-I_2^2}{2}}$

Answer

Correct option: C.
$\sqrt{\frac{I_1^2+I_2^2}{2}}$
C

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

$A$ small ball $B$ of mass $m$ is suspended with light inelastic string of length $L$ from $a$ block $A$ of same mass $m$ which can move on smooth horizontal surface as shown in the figure. The ball is displaced by angle $\theta$ from equilibrium position & then released. Maximum velocity of block during subsequent motion of the system after release of ball is
The figure shows two solid discs with radius ${R}$ and ${r}$ respectively. If mass per unit area is same for both, what is the ratio of ${MI}$ of bigger disc around axis ${AB}$ (Which is $\perp$ to the plane of the disc and passing through its centre) of MI of smaller disc around one of its diameters lying on its plane? Given $'M'$ is the mass of the larger disc. ($MI$ stands for moment of inertia)
If an object is projected vertically upwards with speed, half the escape speed of earth, then the maximum height attained by it is [ $R$ is radius of earth]
Two men of unequal masses hold on to the two sections of a light rope passing over a smooth light pulley. Which of the following are possible?
A zener diode of power rating $2\, {W}$ is to be used as a voltage regulator. If the zener diode has a breakdown of $10 \,{V}$ and it has to regulate voltage fluctuated between $6\, {V}$ and $14\, {V}$, the value of ${R}_{{s}}$ for safe operation should be $....\Omega$
The heat capacity of one mole an ideal is found to be $C_V=3 R(1+a R T) / 2$, where $a$ is a constant. The equation obeyed by this gas during a reversible adiabatic expansion is
If the Bulk modulus of lead is $8.0 \times 10^9 \,N / m ^2$ and the initial density of the lead is $11.4 \,g / cc$, then under the pressure of $2.0 \times 10^8 \,N / m ^2$, the density of the lead is $............. g / cc$
One nanometre is equal to
$\begin{matrix}
   O\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,  \\
   ||\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,  \\
   R-C-H\xrightarrow{R-N{{H}_{2}}}R-CH=N-R.  \\
\end{matrix}$ This reaction gives best yield at
In a primary coil $5\,A$ current is flowing on $220 \,volts$. In the secondary coil $2200\,V$ voltage produces. Then ratio of number of turns in secondary coil and primary coil will be