MCQ
An electric dipole is kept in a non-uniform electric field. It experiences.
  • A
    A force and a torque.
  • B
    A force but not a torque.
  • C
    A torque but no force.
  • D
    Neither a force nor a torque.

Answer

  1. A force and a torque.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A diminished image of an object is to be obtained on a screen 1.0 m from it. This can be achieved by appropriately placing

(a) A convex mirror of suitable focal length

(b) A concave mirror of suitable focal length

(c) A concave lens of suitable focal length

(d) A convex lens of suitable focal length less than 0.25 m

The frequency of a FM transmitter without signal input is called

(a) Lower side band frequency

(b) Upper side band frequency

(c) Resting frequency

(d) None of these

When a thin metal plate is placed in the path of one of the interfering beams of light

(a) Fringe width increases  

 (b) Fringes disappear

(c) Fringes become brighter

(d) Fringes becomes blurred

Energy production in nuclear reactor is due to :
Electric conduction in a semiconductor takes place due to:
  1. Electrons only.
  2. Holes only.
  3. Both electrons and holes.
  4. Neither electrons nor holes.
The size of the nucleus is approximately :

The energy of the highest energy photon of Balmer series of hydrogen spectrum is close to

(a) 13.6 eV

(b) 3.4 eV

(c) 1.5 eV   

(d) 0.85 eV

For a given thermocouple, the thermo e.m.f. can be

(a) Zero  

(b) Positive

(c) Negative

(d) All of the above

A square metallic wire loop of side 0.1 m and resistance of 1W is moved with a constant velocity in a magnetic field of 2 wb/m2 as shown in figure. The magnetic field is perpendicular to the plane of the loop, loop is connected to a network of resistances. What should be the velocity of loop so as to have a steady current of 1mA in loop

(a) 1 cm/sec

(b) 2 cm/sec

(c) 3 cm/sec

(d) 4 cm/sec

The correct symbol for zener diode is

(a)

(b)

(c)

(d)