MCQ
An electric potential difference will be induced between the ends of the conductor shown in the diagram, when the conductor moves in the direction
- A$P$
- B$Q$
- C$L$
- ✓$M$
✓
Answer
Correct option: D.
$M$
Conductor cuts the flux only when, if it moves in the direction of $M$.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A galvanometer with a resistance of 12 gives full scale deflection when a current of $3 \mathrm{~mA}$ is passed. It is required to convert it into a voltmeter which can read up to $18 \mathrm{~V}$. the resistance to be connected is
→A calorimeter of mass $0.2 \mathrm{~kg}$ and specific heat $900 \mathrm{~J} / \mathrm{kg}-\mathrm{K}$. Containing $0.5 \mathrm{~kg}$ of a liquid of specific heat $2400 \mathrm{~J} / \mathrm{kg}-\mathrm{K}$. Its temperature falls from $60^{\circ} \mathrm{C}$ to $55^{\circ} \mathrm{C}$ in one minute. The rate of cooling is
→A moving coil galvanometer is converted into an ammeter reading upto $0.03\,A$ by connecting a shunt of resistance $4r$ across it and into an ammeter reading upto $0.06\,A$ when a shunt of resistance $r$ is connected across it. What is the maximum current which can be sent through this galvanometer if no shunt is used ............... $A$
→If heat given to a system is $6 \mathrm{kcal}$ and work done is $6 \mathrm{~kJ}$. Then change in internal energy is
→Which one of the following does not have the same dimensions
The heat is flowing through two cylindrical rods of same material. The diameters of the rods are in the ratio $1: 2$ and their lengths are in the ratio $2: 1$. If the temperature difference between their ends is the same, the ratio of rate of flow of heat through them will be
→The angle made by the vector $A=\hat{i}+\hat{j}$ with $x$ - axis is
→In isothermic process, which statement is wrong
A small coil C with $N=200$ turns is mounted on one end of a balance beam and introduced between the poles of an electromagnet as shown in figure. The cross sectional area of coil is $A=1.0 \mathrm{~cm}$, length of arm OA of the balance beam is $l=30 \mathrm{~cm}$. When there is no current in the coil the balance is in equilibrium. On passing a current $I=22 \mathrm{~mA}$ through the coil the equilibrium is restored by putting the additional counter weight of mass $\Delta m=60 \mathrm{mg}$ on the balance pan. Find the magnetic induction at the spot where coil is located.
→The distance of a planet from the sun is 5 times the distance between the earth and the sun. The time period of the planet is