Question
As gas expands from initial volume $V_1$ to $V_2$ in three process whose $P$$-V$ curve is shown in the figure, which process is which? In which of the following processes is the gas used the most?

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

State Dulong and Petit's law.
The flow rate of water is $0.58 L / mm$ from a tap of diameter of 1.30 cm . After some time, the flow rate is increased to $4 L / min$. Determine the nature of the flow for both the flow rates. The coefficient of viscosity of water is $10^{-3} Pa- s$ and the density of water is $10^3 kg / m ^3$.
The acceleration associated with a mass 'm' moving in a circular path is to be found. It is given that the velocity at any instant is v = krt, where k is a constant. Classify the motion and find acceleration.
Estimate the total number of air molecules (inclusive of oxygen, nitrogen, water vapour and other constituents) in a room of capacity 25.0m3 at a temperature of 27°C and 1 atm pressure.
The magnetic field B inside a long solenoid, carrying a current of 5.00A, is 3.14 × 10-2T. Find the number of turns per unit length of the solenoid.
Figure shows two blocks of masses m and M connected by a string passing over a pulley. The horizontal table over which the mass m slides is smooth. The pulley has a radius r and moment of inertia I about its axis and it can freely rotate about this axis. Find the acceleration of the mass M assuming that the string does not slip on the pulley.

State first law of thermodynamics. Why Cp > Cv? Prove Cp - Cv = R.
Out of aphelion and perihelion, where is the speed of the earth more and why?
The stress-strain graphs for materials A and B are shown in Fig.

The graphs are drawn to the same scale.
  1. Which of the materials has the greater Young’s modulus?
  2. Which of the two is the stronger material?
100 g of water is supercooled to -10°C. At this point, due to some disturbance mechanised or otherwise some of it suddenly freezes to ice. What will be the temperature of the resultant mixture and how much mass would freeze?
[Sw = 1cal/ g/°C and LWFusion = 80cal/ g]