Question
Assertion : For making permanent magnets, steel is preferred over soft iron.
Reason $\quad$ : As retentivity of steel is smaller.

Answer

(b) Steel is preferred over soft iron for making permanent magnets, because coercivity of steel is larger.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Assertion : The coefficient of volume expansion has dimension $K$.
Reason : The coefficient of volume expansion is defined as the change in volume per unit volume per unit change in temperature.
Assertion : Wire through which current flows gets heated.
Reason : When current is drawn from a cell, chemical energy is converted into heat energy.
Assertion : A metal piece and a non-metal (stone) piece are dropped from the same height near earth's surface. Both will reach the earth's surface simultaneously.
Reason : There is no effect of earth's magnetic field on freely falling body.
Assertion : A piece of red glass is heated till it glows in dark. The colour of glowing glass would be orange.
Reason : Red and orange is complementary colours.
Assertion : Current is passed through a metallic wire, heating it red. When cold water is poured on half of its portion, then rest of the half portion become more hot.
Reason : Resistances decreases due to decrease in temperature and so current through wire increases.
Assertion : In Young's experiment, the fringe width for dark fringes is different from that for white fringes.
Reason : In Young's double slit experiment the fringes are performed with a source of white light, then only black and bright fringes are observed.
Assertion : A kinetic energy of a body is quadrupled, when its velocity is doubled.
Reason : Kinetic energy is proportional to square of velocity.
Assertion : When $P N$-junction is forward biased then motion of charge carriers at junction is due to diffusion. In reverse biasing. The cause of motion of charge is drifting.
Reason : In the following circuit emitter is reverse biased and collector is forward biased.
Image
Assertion : Bernoulli's theorem holds for incompressible, nonviscous fluids.
Reason : The factor $\frac{v}{g}$ is called velocity head.
Assertion : Short wave bands are used for transmission of ratio waves to a large distance
Reason : Short waves are reflected by ionosphere