Question
Curie temperature is the temperature above which:

Answer

The Curie temperature $(T_C​)$ is the temperature at which certain materials lose their permanent magnetic properties, to be replaced by induced magnetism, that is, they go from becoming ferromagnetic to paramagnetic.
Above curie temperature, ferromagnetic material behaves as paramegnetic material.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A plane glass slab is kept over various coloured letters, the letter which appears least raised is(a) Blue (b) Violet(c) Green (d) Red
       
A slab $X$ is placed between the two parallel isolated charged plates as shown in the figure. If $E_p​$ and $E_q$ denotes the intensity of electric field at$ P$ and $Q,$ then:
The process of superimposing signal frequency (i.e. audio wave) on the carrier wave is known as (a) Transmission(b) Reception(c) Modulation(d) Detection
       
In R - L - C series circuit, the potential differences across each element is 20V. Now the value of the resistance alone is doubled, then P.D. across R, L and C respectively.
In the grid circuit of a triode a signal $E=2^{\sqrt{2}} {\cos \omega t}$ is applied. If $m=14$ and $r_p=10\ kW$ then root mean square current flowing through $R _{ L }=12 k \Omega$ will be
In a diode AM-detector, the output circuit consist of R = 1kW and C = 10 pF. A carrier signal of 100 kHz is to be detected. Is it good (a) Yes (b) No(c) Information is not sufficient(d) None of these
   
   
Formula for dispersive power is $($where symbols have their usual meanings$)$
A parallel plate condenser is immersed in an oil of dielectric constant 2. The field between the plates is:
In a charged capacitor, the energy resides(a) The positive charges(b) Both the positive and negative charges(c) The field between the plates(d) Around the edge of the capacitor plates
   
   
A capacitor of capacity $C_1$ is charged to the pointurill File successfully uploaded. $x$, it is connected with a capacitor of capadity $C _2$ as shown in the adjoining figure. The ratio of energies before and after the connection of switch $S$ will be