MCQ
Doppler shift in frequency does not depend upon
- AThe frequency of the wave produced
- BThe velocity of the source
- CThe velocity of the observer
- ✓Distance from the source to the listener
✓
Answer
Correct option: D.
Distance from the source to the listener
(d)
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
An observer looks at a tree of height $15 \mathrm{~m}$ with a telescope of magnifying power $10.$ To him, the tree appears
→Two forces of magnitude $F$ have a resultant of the same magnitude $F$. The angle between the two forces is
→Oxygen is $16$ times heavier than hydrogen. Equal volumes of hydrogen and oxygen are mixed. The ratio of speed of sound in the mixture to that in hydrogen is
→The voltage applied across an $X-$rays tube is nearly
→The coefficient of static friction, $\mu_s$, between block $A$ of mass $2 \mathrm{~kg}$ and the table as shown in the figure is 0.2 . What would be the maximum mass value of block $B$ so that the two blocks do not move? The string and the pulley are assumed to be smooth and massless. $\left(g=10 \mathrm{~m} / \mathrm{s}^2\right)$
→
The ratio of diameters of two wires of same material is $n: 1$. The length of wires are $4 m$ each. On applying the same load, the increase in length of thin wire will be
→An electric motor creates a tension of 4500 newton in a hoisting cable and reels it in at the rate of $2 \mathrm{~m} / \mathrm{sec}$. What is the power of electric motor
→X-rays are
A galvanometer with a resistance of $12 \,\Omega$ gives full scale deflection when a current of $3\, mA$ is passed. It is required to convert it into a voltmeter which can read up to $18\, V$. the resistance to be connected is ............... $\Omega $
→On increasing the temperature of a conductor, its resistance increases because