For the shown circuit, find the effective resistance between the points $A$ and $B$.
  • A$R$
  • B$2R$
  • C$3R$
  • D$4R$
Diffcult
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    In order to determine the $e.m.f.$ of a storage battery it was connected in series with a standard cell in a certain circuit and a current $I_1$ was obtained. When the battery is connected to the same circuit opposite to the standard cell a current $I_2$ flow in the external circuit from the positive pole of the storage battery was obtained. What is the $e.m.f$. $\varepsilon_1$ of the storage battery? The $e.m.f$. of the standard cell is $\varepsilon_2$.
    View Solution
  • 2
    A student is provided with a variable voltage source $V$, a test resistor $R_T=10\,\Omega$, two identical galvanometers $G_1$ and $G_2$ and two additional resistors, $R _1=10\,M\,\Omega$ and $R _2=0.001\,\Omega$. For conducting an experiment to verify ohms law, the most suitable circuit is:
    View Solution
  • 3
    Three resistors each of $2\, ohm$ are connected together in a triangular shape. The resistance between any two vertices will be
    View Solution
  • 4
    In the arrangement of resistances shown below, the effective resistance between points $A$ and $B$ is ............... $\Omega$
    View Solution
  • 5
     In the circuit shown, the current through $8\,ohm$ issame before and after connecting $E$. The value of $E$ is .................... $\mathrm{V}$
    View Solution
  • 6
    A battery having $e.m.f.$ $5\,\,V$ and internal resistance $0.5$ $\Omega$ is connected with a resistance of $4.5 \,\Omega$ then the voltage at the terminals of battery is ............. $V$ 
    View Solution
  • 7
    Three copper wires of lengths and cross sectional areas are $(l,\,A),\,(2l,\,A/2)$ and $(l/2,\, 2A)$ . Resistance is minimum in
    View Solution
  • 8
    A filament bulb $(500 \,W,\,\, 100 \,V)$ is to be used in a $230\, V$ main supply. When a resistance $R$ is connected in series, it works perfectly and the bulb consumes $500\,W.$ The value of $R$ is .................. $\Omega$
    View Solution
  • 9
    A hot electric iron has a resistance of $80\,\Omega $ and is used on a $200\, V$ source. The electrical energy spent, if it is used for two hours, will be  ........... $Wh$
    View Solution
  • 10
    Two wires of same metal have the same length but their cross-sections are in the ratio $3:1$. They are joined in series. The resistance of the thicker wire is $10\,\Omega $. The total resistance of the combination will be ............. $\Omega$
    View Solution