Question
How does the elasticity of material change on:
- Increasing the temperature.
- On heating and cooling gradually.
- On hammering.
✓
Answer
- Decreases.
- Decreases.
- Increases.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A body slipping on a rough horizontal plane moves with a deceleration of $4.0 \mathrm{~m} / \mathrm{s}^2$. What is the coefficient of kinetic friction between the block and the plane?
→The relation between the position and time of a particle under the influence of constant force is $x$ $=(t-4)^2$, where $x$ is in meters and $t$ is in seconds. Then calculate the work done by force in the first 8 seconds.
→2kg water at 80°C is mixed with 3kg water at 20°C. Assuming no heat losses, find the final temperature of the mixture.
The length of the wire shown in figure, between the pulleys is 1.5m and its mass is 12.0g. Find the frequency of vibration with which the wire vibrates in two loops leaving the middle point of the wire between the pulleys at rest.
Write Avogadro's law
A spring attached with a mass m oscillates with a frequency f. What will be the frequency when the same is taken to the moon? Why?
The density of mercury is $13.6 g cm ^{-3}$ in CGS system. Find its value in SI units.
→Write the time period formula of a simple pendulum. Which factor affect the period?
Answer the following: The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only?
A transformer is designed to convert an AC voltage of 220V to an AC voltage of 12V. If the input terminals are connected to a DC voltage of 220V, the transformer usually burns. Explain.