Question
Identify the type of conductors whose V-I relationship is linear.
✓
Answer
- Ohmic conductors
The conductors which obey Ohm’s law are called Ohmic conductors. The linear relationship between voltage and current for these conductors hold good.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The toroid of radius 10 cm has 100 turns. If a current of 0.1 ampere is flowing in it, then the value of the magnetic field on the axis of the toroid will be:
Our eye is most sensitive for which of the following wavelength(a) 4500 Å(b) 5500 Å (c) 6500 Å (d) Equally sensitive for all wave lengths of visible spectrum
On increasing the number of electrons striking the anode of an X-ray tube, which one of the following parameters of the resulting X-rays would increase(a) Penetration power(b) Frequency(c) Wavelength(d) Intensity
An object is placed 40 cm from a concave mirror of focal length 20 cm The image formed is(a) Real, inverted and same in size(b) Real, inverted and smaller(c) Virtual, erect and larger(d) Virtual, erect and smaller
The binding energy per nucleon of $o^{16}$ is $7.97\ MeV$ and that of $O^{17}$ is $7.75\ MeV.$ The energy $($in $MeV)$ required to remove a neutron from $O^{17}$ is
→When $2$ amperes current is passed through a tangent galvanometer, it gives a deflection of $30^{\circ}$. For $60^{\circ}$ deflection, the current must be
→A wire moves with a velocity v through a magnetic field and experiences an induced charge separation as shown in the figure. Then the direction of the magnetic field is
The temperature $(T)$ dependence of resistivity $(r)$ of a semiconductor is represented by
→When an unpolarized light of intensity $\mathrm{I}_0$ is incident on a polarizing sheet, the intensity of the light which does not get transmitted is
→You are given several identical resistances each of value R = 10 Ω and each capable of carrying maximum current of 1 ampere. It is required to make a suitable combination of these resistances to produce a resistance of 5 Ω which can carry a current of 4 amperes. The minimum number of resistances of the type R that will be required for this job(a) 4 (b) 10(c) 8(d) 20