Question

If the distance between a point source and screen is doubled, then intensity of light on the screen will become

(a) Four times

(b) Double

(c) Half    

(d) One-fourth

Answer

(d) One-fourth

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The figure shows a circuit diagram of a ‘Wheatstone Bridge’ to measure the resistance G of the galvanometer. The relation   will be satisfied only when

(a) The galvanometer shows a deflection when switch S is closed

(b) The galvanometer shows a deflection when switch S is open

(c) The galvanometer shows no change in deflection whether S is open or closed

(d) The galvanometer shows no deflection

A parallel plate capacitor is charged and the charging battery is then disconnected. If the plates of the capacitor are moved further apart by means of insulating handles, then

(a) The charge on the capacitor increases

(b) The voltage across the plates decreases

(c) The capacitance increases

(d) The electrostatic energy stored in the capacitor increases

The equivalent capacitance of three capacitors of capacitance   and   are connected in parallel is 12 units and product . When the capacitors   and   are connected in parallel, the equivalent capacitance is 6 units. Then the capacitance are

(a) 2, 3, 7

(b) 1.5, 2.5, 8

(c) 1, 5, 6

(d) 4, 2, 6

The magnetic flux linked with a vector area   in a uniform magnetic field  is

(a)

(b) AB

(c)

(d)  

The phenomenon of change in the _____of light when it passes from one transparent medium to another is refraction.

A series AC circuit has a resistance of $4\Omega$ and a reactance of $3\Omega.$ The impedance of the circuit is:
  1. $5\Omega$
  2. $7\Omega$
  3. $\frac{12}{7}\Omega$
  4. $\frac{7}{12}\Omega$
The number of neutrons in an atom of 90Th230 is:

The extreme wavelengths of Paschen series are

(a) 0.365 μm and 0.565 μm

(b) 0.818 μm and 1.89 μm

(c) 1.45 μm and 4.04 μm

(d) 2.27 μm and 7.43 μm

In order to stop a car in shortest distance on a horizontal road, one should:
  1. Apply the brakes very hard so that the wheels stop rotating.
  2. Apply the brakes hard enough to just prevent slipping.
  3. Pump the brakes (press and release).
  4. Shut the engine off and not apply brakes.
Mark the incorrect statement.