MCQ
In adiabatic expansion of a gas
- AIts pressure increases
- ✓Its temperature falls
- CIts density increases
- DIts thermal energy increases
✓
Answer
Correct option: B.
Its temperature falls
(b)
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
For protecting a sensitive equipment from the external magnetic field, it should be
A metal plate gets heated, when cathode rays strike against, it due to
A balloon is rising vertically up with a velocity of $29 ms$. A stone is dropped from it and it reaches the ground in 10 seconds. The height of the balloon when the stone was dropped from it is $(g=9.8 ms )$
→If the temperature of cold junction of thermocouple is lowered, then the neutral temperature
Two electric lamps of $40$ watt each are connected in parallel. The power consumed by the combination will be
→Find the change in the entropy in the following process $100 \mathrm{gm}$ of ice at $0^{\circ} \mathrm{C}$ melts when dropped in a bucket of water at $50^{\circ} \mathrm{C}$ (Assume temperature of water does not change)
→In an ac circuit, the current is given by $i=5 \sin \left(100 t-\frac{\pi}{2}\right)$ and the ac potential is $V=200 \sin (100)$ volt. Then the power consumption is
→The current through a $4.6 \mathrm{H}$ inductor is shown in the following graph. The induced emf during the time interval $t=5 \mathrm{milli-sec}$ to 6 milli-sec will be
→If the ratio of specific heat of a gas at constant pressure to that at constant volume is $\gamma$, the change in internal energy of a mass of gas, when the volume changes from $V$ to $2 \mathrm{~V}$ constant pressure $p$, is
→A satisfactory photographic print is obtained when the exposure time is $10 \mathrm{sec}$ at a distance of $2 \mathrm{~m}$ from a $60 \mathrm{~cd}$ lamp. The time of exposure required for the same quality print at a distance of $4 \mathrm{~m}$ from a $120 \mathrm{~cd}$ lamp is
→