In an electrolysis experiment, a current i passes through two dif… - Vidyadip

MCQ

In an electrolysis experiment, a current i passes through two different cells in series, one containing a solution of $\mathrm{CuSO}_4$ and the other a solution of $\mathrm{AgNO}_3$. The rate of increase of the weight of the cathodes in the two cells will be

A
In the ratio of the densities of Cu and Ag
B
In the ratio of the at. weights of Cu and Ag
✓
In the ratio of half the atomic weight of Cu to the atomic weight of Ag
D
In the ratio of half the atomic weight of Cu to half the atomic weight of Ag

✓

Answer

Correct option: C.

In the ratio of half the atomic weight of Cu to the atomic weight of Ag

(c) In the ratio of half the atomic weight of Cu to the atomic weight of Ag

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Explore more

More "M.C.Q (1 Marks)" from Heating and Chemical Effect of Current→Heating and Chemical Effect of Current — all question types→Physics STD 12 Science question papers→Gujarat Board STD 12 Science question papers→Gujarat Board question paper generator→

Similar questions

A thin convex lens made from crown glass $\left( {\mu = \frac{3}{2}} \right)$ has focal length $f$. When it is measured in two different liquids having refractive indices $\frac{4}{3}$ and $\frac{5}{3}$ it has the focal lengths $f_1$ and $f_2$ respectively. The correct relation between the focal lengths is:

In the given circuit, value of $Y$ is

The apparent depth of a needle lying at the bottom of the tank, which is filled with water of refractive index $1.33$ to a height of $12.5\,cm$ is measured by a microscope to be $9.4\,cm$. If water is replaced by a liquid of refractive index $1.5$ upto the same height. What distance would the microscope have to be moved to focus on the needle again ?......$cm$

In case Hall effect for a strip having charge $Q$ and area of cross-section $A$, the Lorentz force is

The capacity of a parallel plate condenser depends on

An electric dipole placed in a non$-$uniform electric field can experience:

The distance between the focus and the pole of the mirror is called:

Between the plates of a parallel plate capacitor a dielectric plate is introduced just to fill the space between the plates. The capacitor is charged and later disconnected from the battery. The dielectric plate is slowly drawn out of the capacitor parallel to the plates. The plot of the potential difference across the plates and the length of the dielectric plate drawn out is

Three plates $A, B$ and $C$ each of area $0.1 \ m^2$ are separated by $0.885\ mm$ from each other as shown in the figure. $A$ $10$ $V$ battery is used to charge the system. The energy stored in the system is

Refractive index of glass is $\frac{3}{2}$ and refractive index of water is $\frac{4}{3}$. If the speed of light in glass is $2.00 \times {10^8} m/s,$ the speed in water will be