MCQ
In isothermal expansion, the pressure is determined by
- ATemperature only
- ✓Compressibility only
- CBoth temperature and compressibility
- DNone of these
✓
Answer
Correct option: B.
Compressibility only
(b) For such a case, pressure $=\frac{1}{\text { Compressibility }}$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The relation $3 t=\sqrt{3 x}+6$ describes the displacement of a particle in one direction where $x$ is in metres and $t$ in sec. The displacement, when velocity is zero, is
→A ball whose density is $0.4 \times 10^{-} kg / m$ falls into water from a height of $9 cm$. To what depth does the ball sink
→A ball is projected upwards from the top of tower with a velocity $50-1$ making an angle 30 with the horizontal. The height of tower is $70 m$. After how many seconds from the instant of throwing will the ball reach the ground
→There are two planets. The ratio of radius of the two planets is $K$ but ratio of acceleration due to gravity of both planets is $g$. What will be the ratio of their escape velocity
→A spring of spring constant $5 \times 10 \mathrm{~N} / \mathrm{m}$ is stretched initially by $5 \mathrm{~cm}$ from the unstretched position. Then the work required to stretch it further by another $5 \mathrm{~cm}$ is
→According to Joule's law, if the potential difference across a conductor having a material of specific resistance remains constant, then the heat produced in the conductor is directly proportional to
An electric lamp is marked $60 \ W , 230 \ V$. The cost of $1$ kilowatt hour of power is $Rs.\ 1.25.$ The cost of using this lamp for $8$ hours is
→The magnetic flux linked with a coil is given by an equation $\phi$ (in webers $)=8 t^2+3 t+5$. The induced e.m.f. in the coil at the fourth second will be
→A copper wire of length $4.0 \ m$ and area of cross-section $1.2\ cm ^2$ is stretched with a force of $4.8 \times 10^3 \ N$. If Young's modulus for copper is $1.2 \times 10^{11}\ N / m ^2$, the increase in the length of the wire will be
→An ideal gas is taken around $A B C A$ as shown in the above $P-V$ diagram. The work done during a cycle is
→