Question

Light waves producing interference have their amplitudes in the ratio 3 : 2. The intensity ratio of maximum and minimum of interference fringes is

(a) 36 : 1 

(b) 9 : 4

(c) 25 : 1 

(d) 6 : 4

Answer

(c) 25 : 1 

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A dip needle in a plane perpendicular to magnetic meridian will remain

(a) Vertical

(b) Horizontal

(c) In any direction

(d)  At an angle of dip to the horizontal

When a 12 Ω resistor is connected with a moving coil galvanometer then its deflection reduces from 50 divisions to 10 divisions. The resistance of the galvanometer is

(a) 24 Ω

(b) 36 Ω

(c) 48 Ω

(d) 60 Ω

What is the SI unit of self-inductance?

Resistance of a voltameter is 2, it is connected in series to a battery of 10 V through a resistance of 3. In a certain time mass deposited on cathode is 1 gm. Now the voltameter and the 3 resistance are connected in parallel with the battery. Increase in the deposited mass on cathode in the same time will be

(a) 0 

(b) 1.5 gm

(c) 2.5 gm

(d) 2 gm

Two charges + 5μC and +10 μC are placed 20 cm apart. The net electric field at the mid-Point between the two charges is

(a) 4.5  N/C directed towards +5 μC

(b) 4.5  N/C directed towards +10 μC

(c) 13.5  N/C directed towards +5 μC

(d) 13.5  N/C directed towards +10 μC

The magnetic induction at a point P which is distant 4 cm from a long current carrying wire is . The field of induction at a distance 12 cm from the same current would be

(a) 3.33

(b) 1.11

(c) 3

(d) 9

Magnetic needle of a magnetic compass is made up of ___________ .

The waves used in telecommunication are

(a) IR

(b) UV

(c) Microwave

(d) Cosmic rays

In a p-n junction:
  1. New holes and conduction electrons are produced continuously throughout the material.
  2. New holes and conduction electrons are produced continuously throughout the material except in the depletion region.
  3. Holes and conduction electrons recombine continuously throughout the material.
  4. Holes and conduction electrons recombine continuously throughout the material except in the depletion region.
The field lines of a single negative charge are: