MCQ
Plotting $1 / \Lambda_{\mathrm{m}}$ against $\mathrm{c} \Lambda_{\mathrm{m}}$ for aqueous solutions of a monobasic weak acid ($HX$) resulted in a straight line with $y$-axis intercept of $\mathrm{P}$ and slope of $S$. The ratio $\mathrm{P} / \mathrm{S}$ is

$\left[\Lambda_{\mathrm{m}}=\right.$ molar conductivity

$\Lambda_{\mathrm{m}}^{\circ}=$ limiting molar conductivity

$\mathrm{c}=$ molar concentration

$\mathrm{K}_{\mathrm{a}}=$ dissociation constant of $\mathrm{HX}$ ]

  • $\mathrm{K}_{\mathrm{a}} \Lambda_{\mathrm{m}}^{\circ}$
  • B
    $\mathrm{K}_{\mathrm{a}} \Lambda_{\mathrm{m}}^{\circ} / 2$
  • C
    $2 \mathrm{~K}_{\mathrm{a}} \Lambda_{\mathrm{m}}^{\circ}$
  • D
    $1 /\left(\mathrm{K}_{\mathrm{a}} \Lambda_{\mathrm{m}}^{\circ}\right)$

Answer

Correct option: A.
$\mathrm{K}_{\mathrm{a}} \Lambda_{\mathrm{m}}^{\circ}$
a
For weak acid, $\alpha=\frac{\Lambda_m}{\Lambda_0}$

$\mathrm{K}_\alpha=\frac{C \alpha^2}{1-\alpha} \Rightarrow \mathrm{K}_{\mathrm{s}}(1-\alpha)=C \alpha^2$

$\Rightarrow \mathrm{K}_\alpha\left(1-\frac{\Lambda_{\mathrm{m}}}{\Lambda_0}\right)=C\left(\frac{\Lambda_{\mathrm{m}}}{\Lambda_0}\right)^2$

$\Rightarrow \mathrm{K}_2-\frac{\Lambda_{\mathrm{m}} \mathrm{K}_{\mathrm{a}}}{\Lambda_0}=\frac{C \Lambda_{\mathrm{m}}^2}{\left(\Lambda_0\right)^2}$

Diride by ' $\Lambda_{\mathrm{m}}$ '

$\Rightarrow \frac{\mathrm{K}_{\mathrm{a}}}{\Lambda_{\mathrm{m}}}=\frac{\mathrm{C} \Lambda_{\mathrm{m}}}{\left(\Lambda_0\right)^2}+\frac{\mathrm{K}_{\mathrm{a}}}{\Lambda_0}$

$\Rightarrow \frac{1}{\Lambda_{\mathrm{m}}}=\frac{\mathrm{C} \Lambda_{\mathrm{m}}}{\mathrm{K}_{\mathrm{a}}\left(\Lambda_0\right)^2}+\frac{1}{\Lambda_0}$

Plot $\frac{1}{\Lambda_m}$ vi $C \Lambda_m$ has

Slope $=\frac{1}{\mathrm{~K}_{\mathrm{u}}\left(\Lambda_0\right)^2}=\mathrm{S}$

$\mathrm{y} \text {-intercept }=\frac{1}{\Lambda_0}=\mathrm{P}$

Then, $\frac{P}{S}=\frac{\frac{1}{\Lambda_0}}{\frac{1}{K_2\left(\Lambda_0\right)^2}}=\mathrm{K}_2 \Lambda_0$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Fats and oils are mixture of
$HN{O_3}$ in aqueous solution yields
In the reaction of formation of sulphur trioxide by contact process $2S{O_2} + {O_2} \rightleftharpoons 2S{O_3}$ the rate of reaction was measured as $\frac{{d\left[ {{O_2}} \right]}}{{dt}} =  - 2.5 \times {10^{ - 4}}\,mol\,{L^{ - 1}}\,{s^{ - 1}}$ . The rate of reaction is terms of $[SO_2]$ in $mol\,L^{- 1}\, s^{-1}$ will be:
In the reaction :

$\begin{array}{*{20}{c}}
  {C{H_3}\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,} \\ 
  {|\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,\,} \\ 
  {C{H_3} - CH - C{H_2} - O - C{H_2} - C{H_3}} 
\end{array}\,+ HI \, \xrightarrow{{Heated}}$

Which of the following compounds will be formed ?

Match List $I$ with List $II$

List $I$ Complex List $II$ $CFSE(\Delta_0)$
$A$ $\left[ Cu \left( NH _3\right)_6\right]^{2+}$ $I$ $-0.6$
$B$ $\left[\operatorname{Ti}\left( N _2 O \right)_6\right]^{3+}$ $II$ $-2.0$
$C$ $\left[ Fe ( CN )_6\right]^{3-}$ $III$ $-1.2$
$D$ $\left[ NiF _6\right]^{4-}$ $IV$ $-0.4$

Choose the correct answer from the options given below:

Colour of iodine solution is disappeared by shaking it with aqueous solution of
The density of a solution prepared by dissolving $120\, g$ of urea ( mol. mass $= 60\, u$) in $g$ of water is $1.15\, g /mL .$ The molarity of this solution is : ............ $\mathrm{M}$
“$925$ fine silver” means an alloy of :
The weight of ${H_2}{C_2}{O_4}.\,2{H_2}O$ required to prepare $500\,ml$ of $0.2\,N$ solution is .......... $g$
An element $(X)$ forms compounds of the formula $XC{l_3},$ ${X_2}{O_5}$ and $C{a_3}{X_2},$ but does not form $XC{l_5}$, which of the following is the element $X$