MCQ
Ray diverging from a point source from a wave front that is
- ACylindrical
- ✓Spherical
- CPlane
- DCubical
✓
Answer
Correct option: B.
Spherical
Spherical
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The primary origin $(s)$ of magnetism lies in:
→If the current in the circuit for heating the filament is increased, the cutoff wavelength:
Match List$-I$ with List$-II$ :
→| List$-I$ | List$-II$ |
| $(a)$ $\omega L\,>\,\frac{1}{\omega C}$ | $(i)$ Current is in phase with $emf$ |
| $(b)$ $\omega {L}=\frac{1}{\omega {C}}$ | $(ii)$ Current lags behind the applied $emf$ |
| $(c)$ $\omega {L}\, < \,\frac{1}{\omega {C}}$ | $(iii)$ Maximum current occurs |
| $(d)$ resonant frequency | $(iv)$ Current leads the $emf$ |
Choose the correct answer from the options given below :
In the set up shown in Fig the two slits, ${S_1}$ and ${S_2}$ are not equidistant from the slit $S$. The central fringe at $O$ is then
→The current in a triode at anode potential $100 V$ and grid potential $– 1.2 V$ is $7.5 mA$. If grid potential is changed to $– 2.2 V,$ the current becomes $5.5 mA.$ the value of trans conductance $(g_m)$ will be
→The first diffraction minimum due to the single slit diffraction is seen at $\theta = {30^o}$ for a light of wavelength $5000\,\mathop A\limits^o $ falling perpendicularly on the slit. The width of the slit is
→Of the following properties, the photon does not process:
When the light source is approaching, the Doppler effect for light is known as:
The resistance of hot tungsten filament is about 10 times the cold resistance. What will be the resistance of 100 W and 200 V lamp when not in use
Which of the following Statements is correct?