MCQ
The capacity of any conductor is :
  • A
    $C=qV$
  • B
    $C=\frac{V}{q}$
  • C
    $C=\frac{1}{2}qV$
  • $C=\frac{q}{V}$

Answer

Correct option: D.
$C=\frac{q}{V}$
D

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The $emf$ of a thermocouple, one junction of which is kept at $0^{\circ} \mathrm{C}$, is given by $\mathrm{e}=\mathrm{at}+\mathrm{bt}^2$ the Peltier co$-$efficient will be
One cannot see through fog because .......... :
A conducting wire frame is placed in a magnetic field which is directed into the paper. The magnetic field is increasing at a constant rate. The directions of induced current in wires $AB$ and $CD$ are
A parallel plate condenser is connected to a battery of emf 4 volt. If a plate of dielectric constant 8 is inserted into it, the potential difference on the condenser will be:
A highly conducting ring of radius $R$ is perpendicular to and concentric with the axis of a long solenoid as shown in fig. The ring has a narrow gap of width $d$ in its circumference. The solenoid has cross sectional area $A$ and a uniform internal field of magnitude $B_0.$ Now beginning at $t=0,$ the solenoid current is steadily increased to so that the field magnitude at any time $t$ is given by $B(t)=B_0+\alpha t$ where $\alpha>0.$ Assuming that no charge can flow across the gap, the end of ring which has excess of positive charge and the magnitude of induced $\text{e.m.f.}$ in the ring are respectively
The work function of a photoelectric material is $3.3 \ eV .$ The threshold frequency will be equal to
The current in a coil of 0.4mH coil increases by 250mA in 0.1 seconds. The induced emf will be:-
If an electron oscillates at a frequency of 1 GHz it gives(a) X-rays (b) Mirowaves (c) Infrared rays (d) None of these
       
A ferromagnetic material is placed in an external magnetic field. The magnetic domains:
  1. Increase in size.
  2. Decrease in size.
  3. May increase or decrease in size.
  4. Have no relation with the field.
An interference pattern was made by using red light. If the red light changes with blue light, the fringes will become (a) Wider  (b) Narrower(c) Fainter(d) Brighter