MCQ
The capacity of parallel plate condenser depends on
- AThe type of metal used
- BThe thickness of plates
- CThe potential applied across the plates
- ✓The separation between the plates
✓
Answer
Correct option: D.
The separation between the plates
d
(d) $C = \frac{{K{\varepsilon _0}A}}{d}$
(d) $C = \frac{{K{\varepsilon _0}A}}{d}$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A galvanometer with its coil resistance $25\,\Omega $ requires a current of $1\,mA$ for its full deflection. In order to construct an ammeter to read up to a current of $2\,A,$ the approximate value of the shunt resistance should be
→For the post office box arrangement to determine the value of unknown resistance the unknown resistance should be connected between
In a grease spot photometer light from a lamp with dirty chimney is exactly balanced by a point source distance $10 \,cm $ from the grease spot. On clearing the chimney, the point source is moved $2 \,cm $ to obtain balance again. The percentage of light absorbed by dirty chimney is nearly......$\%$
→A cylindrical metal wire of length $l$ and cross sections area $S$, has resistance $R$, conductance $G$, conductivity $\sigma$ and resistivity $\rho$. Which one of the following expressions for $\sigma$ is valid
→Two short magnets of equal dipole moments $M $ are fastened perpendicularly at their centre (figure). The magnitude of the magnetic field at a distance $d $ from the centre on the bisector of the right angle is
→Two short magnets of equal dipole moments M are fastened perpendicularly at their centre (figure). The magnitude of the magnetic field at a distance d from the centre on the bisector of the right angle is
A radioactive material has a half life of $10$ days. What fraction of the material would remain after $30$ days
→Which one is reverse-biased
The angle between the earth's magnetic and the earth's geographical axes is
What is the nature of equipotential surfaces in case of a positive point charge?