MCQ
The electrical circuit used to get smooth $d c$ output from a rectifier circuit is called
- AOscillator
- ✓Filter
- CAmplifier
- DLogic gates
✓
Answer
Correct option: B.
Filter
Filter circuits are used to get smooth $d c \pi$-filter is the best filter.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A constant force acts on a body of mass $0.9 kg$ at rest for $10 s$. If the body moves a distance of $250 m$, the magnitude of the force is
→The $P-V$ graph of an ideal gas cycle is shown here as below. The adiabatic process is described by
→Two cylinders $A$ and $B$ fitted with pistons contain equal amounts of an ideal diatomic gas at $300 \mathrm{~K}$. The piston of $A$ is free to move while that of $B$ is held fixed. The same amount of heat is given to the gas in each cylinder. If the rise in temperature of the gas in $A$ is $30 \mathrm{~K}$, then the rise in temperature of the gas in $B$ is
→Two trains travelling on the same track are approaching each other with equal speeds of $40 m / s$. The drivers of the trains begin to decelerate simultaneously when they are just $2.0 km$ apart. Assuming the decelerations to be uniform and equal, the value of the deceleration to barely avoid collision should be
→Two plane mirrors are inclined at an angle of $72^{\circ}$. The number of images of a point object placed between them will be
→If a coil of metal wire is kept stationary in a non-uniform magnetic field, then
A car travels north with a uniform velocity. It goes over a piece of mud which sticks to the tyre. The particles of the mud, as it leaves the ground are thrown
The magnetic field due to a short magnet at a point on its axis at distance $X \mathrm{~cm}$ from the middle point of the magnet is $200$ Gauss. The magnetic field at a point on the neutral axis at a distance $X \mathrm{~cm}$ from the middle of the magnet is
→When $100$ volts dc is supplied across a solenoid, a current of $1.0$ amperes flows in it. When $100$ volts ac is applied across the same coil, the current drops to $0.5$ ampere. If the frequency of ac source is $50\ Hz$, then the impedance and inductance of the solenoid are
→A coil of $N=100$ turns carries a current $l=5 \mathrm{~A}$ and creates a magnetic flux $\phi=10^{-5} \mathrm{Tm}^{-2}$ per turn. The value of its inductance $L$ will be
→