MCQ
The perfect pairs for a superconductor substance is-
- A$\chi=1$ व $\mu_r=0$
- B$\chi=0$ व $\mu_r=1$
- ✓$\chi=-1$ व $\mu_r=0$
- D$\chi=0$ व $\mu_r=-1$
✓
Answer
Correct option: C.
$\chi=-1$ व $\mu_r=0$
C
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
In the uranium radioactive series, the initial nucleus is $92^{\mathrm{U}^{238}}$ and the final nucleus is $82^{\mathrm{Pb}^{206}}$ . When the uranium nucleus decays to lead, the number of $\alpha - $particles emitted will be
→The two slits at a distance of $1\ mm$ are illuminated by the light of wavelength $6.5 \times 10^{-7} m$ . The interference fringes are observed on a screen placed at a distance of $1m.$ The distance between third dark fringe and fifth bright fringe will be
→In comparing e.m.f.s of 2 cells with the help of potentiometer, at the balance point, the current flowing through the wire is taken from:
What is the reading of voltmeter in the following figure
The dependence of drift velocity on applied electric field E is:
$ABC$ is a right angled triangle in which $AB = 3 \ cm$ and $BC = 4 \ cm$. And $\angle ABC = \pi/2.$ The three charges $+15, +12$ and $-20\ e.s.u.$ are placed respectively on $A, B$ and $C.$ The force acting on $B$ is
→A short bar magnet with its north pole facing north forms a neutral point at $P$ in the horizontal plane. If the magnet is rotated by $90^{\circ}$ in the horizontal plane, the net magnetic induction at $P$ is $($Horizontal component of earth's magnetic field $=B_H)$
→A triode whose mutual conductance is 2.5 m A/volt and anode resistance is 20 kilo ohm, is used as an amplifier whose amplification is 10. The resistance connected in plate circuit will be(a) 1 kW (b) 5 kW(c) 10 kW(d) 20 kW
Assertion : When $PN-$junction is forward biased then motion of charge carriers at junction is due to diffusion. In reverse biasing. The cause of motion of charge is drifting.
Reason : In the following circuit emitter is reverse biased and collector is forward biased.
→Reason : In the following circuit emitter is reverse biased and collector is forward biased.
In a communication system, noise is most likely to affect the signal (a) At the transmitter(b) In the channel or in the transmission line (c) In the information source(d) At the receiver