Question
To get line spectrum, the substances are excited in their:
✓
Answer
- Atomic state
A spectral line is a dark or bright line in an otherwise uniform and continuous spectrum, resulting from emission or absorption of light in a narrow frequency range, compared with the nearby frequencies.
Spectral lines are often used to identify atoms and molecules from their characteristic spectral lines.
The characteristics spectral is produced by exciting them into atomic state.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
An air core solenoid has $1000$ turns and is one metre long. Its cross$-$sectional area is $10 \ cm^2$. Its self inductance is
→The ratio of the energies of the hydrogen atom in its first to second excited state is(a) 1/ 4(b) 4/9(c) 9/ 4(d) 4
Only paraxial rays are used in image formation by spherical mirror; because this:
In the circuit given $E = 6.0 V, R_1 = 100\ ohms, R_2 = R_3 = 50\ ohms, R_4 = 75\ ohms$. The equivalent resistance of the circuit, in $ohms,$ is
→In a magnetic field of $0.05T,$ area of a coil changes from $101\ cm^2$ to $100\ cm^2$ without changing the resistance which is $2W.$ The amount of charge that flow during this period is
→A electron $( q=1.6 \times 10^{-19} \mathrm{C} )$ is moving at right angle to the uniform magnetic field $3.534 \times 10^{-5} \mathrm{~T}.$ The time taken by the electron to complete a circular orbit is
→The two elements, with same number of electrons but different mass number, are known as:
Two charges +4e and +e are at a distance x apart. At what distance, a charge q must be placed from charge +e so that it is in equilibrium(a) x/2 (b) 2x/3 (c) x/3(d) x/6
The two bulbs as in the above question are connected in series to a 200 volt line. Then(a) The potential drop across the two bulbs is the same(b) The potential drop across the 40 watt bulb is greater than the potential drop across the 100 watt bulb(c) The potential drop across the 100 W bulb is greater than the potential drop across the 40 W bulb(d) The potential drop across both the bulb is 200 volt
An AC source is rated 220V, 50Hz. The average voltage is calculated in a time interval of 0.01s, It: