Question

Two electrolytic cells containing  and  respectively are connected in series and a current is passed through them until 1 mg of copper is deposited in the first cell. The amount of silver deposited in the second cell during this time is approximately [Atomic weights of copper and silver are respectively 63.57 and 107.88]

(a) 1.7 mg

(b) 3.4 mg

(c) 5.1 mg

(d) 6.8 mg

Answer

(b) 3.4 mg

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

In a process on a system, the initial pressure and volume are equal to the final pressure and volume.
  1. The initial temperature must be equal to the final temperature.
  2. The initial internal energy must be equal to the final internal energy.
  3. The net heat given to the system in the process must be zero.
  4. The net work done by the system in the process must be zero.

Newton postulated his corpuscular theory on the basis of

(a) Newton’s rings

(b) Colours of thin films

(c) Rectilinear propagation of light

(d) Dispersion of white light

The magnetic moment (μ) of a revolving electron around the nucleus varies with principal quantum number n as

(a) μ

(b) μ 1/n

 (c) μ  

(d) μ 1/ 

Our eye is most sensitive for which of the following wavelength

(a) 4500 Å

(b) 5500 Å

(c) 6500 Å

(d) Equally sensitive for all wave lengths of visible spectrum

An object can be negatively charged by:

The refractive index of a material of a prism of angles 45°– 45° – 90° is 1.5. The path of the ray of light incident normally on the hypotenuse side is shown in

(a)

(b)

(b)

(d)

When a drop of oil is spread on a water surface, it displays beautiful colours in daylight because of:

Two lenses have focal lengths  and  and their dispersive powers are   and  respectively. They will together form an achromatic combination if

(a)   =

(b)

(c)  

(d)  

When plate voltage in diode valve is increased from 100 volt to 150 volt then plate current increases from 7.5 mA to 12 mA. The dynamic plastic resistance will be

(a) 10 kW                                           

(b) 11 kW

(c) 15 kW

(d) 11.1 kW

The width of forbidden energy gap in the semiconductor is approximately :