Question

Two opposite and equal charges 4 ×   when placed 2  cm away, form a dipole. If this dipole is placed in an external electric field 4 ,  the value of maximum torque and the work done in rotating it through 180°  will be

(a) 64  and  64

(b) 32   and 32  

(c) 64  and 32  

(d) 32  and 64  

Answer

(d) 32  and 64  

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Identify the correct statement about the magnetic field lines:

The ratio of minimum to maximum wavelength in Balmer series is

(a) 5 : 9

(b) 5 : 36

(c) 1 : 4

(d) 3 : 4

Two parallel slits 0.6 mm apart are illuminated by light source of wavelength 6000 Å. The distance between two consecutive dark fringes on a screen 1 m away from the slits is

(a) 1 mm

(b) 0.01 mm 

(c) 0.1 m

(d) 10 m

What is the angle between the electric dipole moment and the electric field strength due to it on the equatorial line

(a) 0o

(b) 90o

(c) 180o   

(d) None of these

Which of the following shows that the earth behaves as a magnet?
A person wishes to distinguish between two pillars located at a distance of 11km. What should be the minimum distance between these pillars (resolving power of normal human eye is 1')?
When a glass rod is rubbed with silk, what kind of charge will be developed on glass?
If the two ends of a p-n junction are joined by a wire:
  1. There will not be a steady current in the circuit.
  2. There will be a steady current from the n-side to the p-side.
  3. There 'will a steady current from the p-side. to the n-side.
  4. There may or may not be a current depending upon the resistance of the connecting wire.
If the value of C in a series RLC circuit is decreased, the resonant frequency.

In an X-rays tube, the intensity of the emitted X-rays beam is increased by

(a) Increasing the filament current

(b) Decreasing the filament current

(c) Increasing the target potential

(d) Decreasing the target potential