Question
What does the hysteresis loop represents?

Answer

A magnetic hysteresis loop is a closed curve obtained by plotting the magnetic flux density B of a ferromagnetic material against the corresponding magnetizing field H when the material is taken through a complete magnetizing cycle. The area enclosed by the loop represents the hysteresis loss per unit volume in taking the material through the magnetizing cycle.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Obtain the balancing conditions in case of Wheatstone's bridge.
A ray of light is incident on a water surface of refractive index $\frac{4}{3}$ making an angle of $40^{\circ}$ with the surface. Find the angle of refraction.
Define or describe a Potentiometer.
In Young's double$-$slit experiment, interference fringes are observed on a screen $1 m$ away from the two slits which are $2\ mm$ apart. A point $P$ on the screen is $1.8\ mm$ from the central bright fringe,
$(i)$ Find the path difference at $P$.
$(ii)$ If the wavelength of the light used in $4800 A$, what can you say about the illumination at $p?$
Draw a diagram showing all components of forces acting on a vehicle moving on a curved banked road. Write the necessary equation for maximum safety, speed and state the significance of each term involved in it.
A moving-coil galvanometer has coil of area $10 cm ^2$ and 100 turns. It is suspended by a fibre of torque constant $10^{-8} N \cdot m /$ degree in a radial magnetic field of induction $0.05 Wb / m ^2$. Find the angle through which the coil will be deflected when a current of $16 \mu A$ passes through it.
Define
(1) emissive power or radiant power
(2) coefficient of emission of a body
Calculate the wavelength of \(H _\gamma\) line and series limit for Brackett series.
A \(1000 mH\) inductor, \(36 mF\) capacitor and \(12 \Omega\) resistor are connected in series to \(120 V ; 50 Hz AC\) source. Calculate: (i) impedance of the circuit at resonance (ii) current at resonance (iii) resonant frequency.
Two long parallel current $-$ carrying conductors are $0.4 m$ apart in air and carry currents $5 A$ and $10A$. Calculate the force per metre on each conductor, if the currents are in the same direction and in the opposite direction.