MCQ
What is the driving force in a working Electrical Circuit?
  • A
    Voltage Difference.
  • B
    Current.
  • C
    Temperature difference.
  • D
    Chemical Imbalance.

Answer

  1. Voltage Difference.

Explanation:

When a potential difference is applied across a resistor then randomly moving free electrons start to move towards positive terminal due to force applied by electric field generated due to voltage difference. thus a start to Current Flows from High Voltage to Low Voltage.

Voltage is cause and current is effect.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The temperature of an object is observed to rise in a period. In this period:
  1. Heat is certainly supplied to it.
  2. Heat is certainly not supplied to it.
  3. Heat may have been supplied to it.
  4. Work may have been done on it.
The peak voltage in a 220V AC source is:
Which of the following is another term for magnetization?

When a ray of light passes from a denser to a rarer medium:

Which of the following wavelength falls in X-ray region

(a) 10000 Å

(b) 1000 Å

(c) 1 Å

(d) 10–2 Å

A potentiometer wire is 100cm long and a constant potential difference is maintained across it. Two cells are connected in series first to support one another and then in opposite direction. The balance points are obtained at 50cm and 10cm from the positive end of the wire in the two cases. The ratio of emf's is:

In hydrogen atom, an electron is revolving in the orbit of radius 0.53  with 6.6  rotations/second. Magnetic field produced at the centre of the orbit is

(a) 0.125  

(b) 1.25  

(c) 12.5  

(d) 125  

A finite ladder is constructed by connecting several sections of 2μF,4 μF  capacitor combinations as shown in the figure. It is terminated by a capacitor of capacitance C. What value should be chosen for C such that the equivalent capacitance of the ladder between the points A and B becomes independent of the number of sections in between

(a) 4μF

(b) 2 μF

(c) 18 μF

(d) 6 μF

Two capacitors each having capacitance C and breakdown voltage V are joined in series. The capacitance and the breakdown voltage of the combination will be:
  1. $\text{2C}\ \text{and}\ \text{2V}$
  2. $\frac{\text{C}}{2}\ \text{and}\ \frac{\text{V}}{2}$
  3. $\text{2C}\ \text{and}\ \frac{\text{V}}{2}$
  4. $\frac{\text{C}}{2}\ \text{and}\ \text{2V}$
According to Huygens, the ether medium pervading entire universe is: