Question
Write the uses of capacitors.

Answer

SELF

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Find the neutral temperature and inversion temperature of a copper-iron thermocouple if the reference junction is kept at $0^\circ C$. Use the data in the table.
 
Metal with
$a$
$b$
lead $(Pb)$
$\mu\text{V}/^\circ\text{C}$
$\mu\text{V}/^\circ(\text{C})^2$
Aluminium
$-0.47$ $0.003$
Bismuth
$-43.7$ $-0·47$
Copper
$2.76$ $0·012$
Gold
$2.90$ $0.0093$
Iron
$16.6$ $-0.030$
Nickel
$19.1$ $-0.030$
Platinum
$-1.79$ $-0.035$
Silver
$2.50$ $0.012$
Steel
$10.8$ $-0.016$
 
Lenz's law is a specific statement of law of conservation of energy-Explain.
Explain Gauss's law for magnetism
A parallel beam of monochromatic light falls normally on a single narrow slit. How does the angular width of the principal maximum in the resulting diffraction pattern depend on the width of the slit?
An $\alpha$-particle and a proton are accelerated through the same potential difference. Find the ratio of their de Broglie wavelength.
The space between the plates of a parallel plate capacitor is completely filled in two ways. In the first case, it is filled with a slab of dielectric constant $K$. In the second case, it is filled with two slabs of equal thickness and dielectric constants $K_1$ and $K_2$ respectively as shown in the figure. The capacitance of the capacitor is same in the two cases. Obtain the relationship between $K, K_1$ and $K_2$.
What is linear magnification? Obtain equation of linear magnification for mirror.
Heat at the rate of 200W is produced in an X-ray tube operating at 20kV. Find the current in the circuit. Assume that only a small fraction of the kinetic energy of electrons is converted into X-rays.
A smooth block loosely fits in a circular tube placed on a horizontal surface. The block moves in a uniform circular motion along the tube (figure). Which wall (inner or outer) will exert a nonzero normal contact force on the block?
The torque of the weight of any body about any vertical axis is zero. Is it always correct?