Question
In a semiconductor, which of the following statement is correct?

Answer

  1. p - n junction is electrically neutral.
Explanation:
Generally Si is a semiconductor. In p type semiconductor acceptor level lies near the valence band and each donor atom contribute one electron. p-n junction electrically neutral because total charge is zero.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

In a circuit $5$ percent of total current passes through a galvanometer. If resistance of the galvanometer is $G$ then value of the shunt is
Which source is associated with a line emission spectrum?
The color coding of  earth, live and neutral wire respectively is:
The condition for stable orbit in Bohr's model of hydrogen atom is :
A motor car is going due north at a speed of 50km/h. It makes a 90° left turn without changing the speed. The change in the velocity of the car is about:
  1. 50km/h towards west.
  2. 70km/h towards south-west.
  3. 70km/h towards north-west.
  4. zero.
The magnetic moment of a circular coil carrying current is:
If all the resistors shown have the value $2$ ohm each, the equivalent resistance over $AB$ is
In the Geiger-Marsden experiment, the force that scatters particles is:
A large cylindrical tank has a hole of area A at its bottom. Water is poured in the tank by a tube of equal cross-sectional area A ejecting water at the speed v.
  1. The water level in the tank will keep on rising.
  2. No water can be stored in the tank.
  3. The water level will rise to a height $\frac{\text{v}^2}{2\text{g}}$ and then stop.
  4. The water level will oscillate.
The distance between the plates of a parallel plate condenser is 8mm and P.D. 120 volts. If a 6mm thick slab of dielectric constant 6 is introduced between its plates, then(a) The charge on the condenser will be doubled(b) The charge on the condenser will be reduced to half(c) The P.D. across the condenser will be 320 volts(d) The P.D. across the condenser will be 45 volts