MCQ
In the given figure for a projectile
  • A
    $y=\left[\frac{x_1 x_2}{x_1-x_2}\right] \tan \theta$
  • $y=\left[\frac{x_1 x_2}{x_1+x_2}\right] \tan \theta$
  • C
    $y=\left[\frac{2 x_1 x_2}{x_1+x_2}\right] \cos \theta$
  • D
    $y=\left[\frac{2 x_1 x_2}{x_1+x_2}\right] \tan \theta$

Answer

Correct option: B.
$y=\left[\frac{x_1 x_2}{x_1+x_2}\right] \tan \theta$
b
(b)

The equation of trajectory for point ' $P$ 'can be written as :

$y=x \tan \theta\left(1-\frac{x}{R}\right)=x_1 \tan \theta\left(1-\frac{x_1}{x_1+x_2}\right)=x_1 \tan \theta\left(\frac{x_1+x_2-x_1}{x_1+x_2}\right)$

$y=\frac{x_1 x_2}{x_1+x_2} \tan \theta$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A planet is revolving around the sun as shown in elliptical path  the orbital velocity of the planet will be minimum at
Taking into account of the slgnificant figures, what is the value of $9.99\, m -0.0099\, m ?$
Two blocks $'A$' and $'B'$ each of mass $'m'$ are placed on a smooth horizontal surface. Two horizontal force $F$ and $2F$ are applied on the $2$ blocks $'A'$ and $'B'$ respectively as shown in figure. The block $A$ does not slide on block $B$. Then the normal reaction acting between the two blocks is
Two identical square rods of metal are welded end to end as shown in figure $(a)$. Assume that $10\, cal$ of heat flows through the rods in $2\, min$. Now the rods are welded as shown in figure, $(b)$. The time it would take for $10$ cal to flow through the rods now, is ........ $\min$
The work done in blowing a soap bubble of radius $0.2\, m$ is (the surface tension of soap solution being $0.06\, N/m$)
A particle of mass $2\, kg$ is initially at rest. A force acts on it whose magnitude changes  with time. The force time graph is shown below. The velocity of the particle after $10\, s$ is ......... $ms^{-1}$
A block of mass $100 \mathrm{~kg}$ slides over a distance of $10 \mathrm{~m}$ on a horizontal surface. If the co-efficient of friction between the surfaces is $0.4$ , then the work done against friction (in $\mathrm{J}$ ) is :
To make the frequency double of a spring oscillator, we have to
A particle is projected from the ground with an initial speed $\upsilon $ at an angle $\theta $ with horizontal. The average velocity of the particle between its point of projection and highest point of trajectory is
To an ideal triatomic gas $800 \,cal$ heat energy is given at constant pressure. If vibrational mode is neglected, then energy used by gas in work done against surroundings is ......... $cal$