MCQ
Which is reverse biased diode
  • A
     
  • C
  • D

Answer

Correct option: B.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A heater coil is cut into two parts of equal length and one of them is used in the heater. The ratio of the heat produced by this half coil to that by the original coil is(a) 2 : 1   (b) 1 : 2(c) 1 : 4    (d) 4 : 1
       
The value of electric field in an electromagnetic wave originating from a point source of light at a distance of  10 meter is $\text{E}=\frac{500\text{Volt}}{\text{m}}$ The electric field at a distance of 5 meter will be.
Two very thin metallic wires placed along $X$ and $Y-$axis carry equal currents as shown here. $AB$ and $CD$ are lines at $45^\circ$  with the axes with origin of axes at $O.$ The magnetic field will be zero on the line
Magnetic field does not cause deflection in:
  1. $\alpha-\text{rays}$
  2.  $\beta^+-\text{rays}$
  3.  $\beta^--\text{rays}$
  4.  $\gamma-\text{rays}$
A 4 μF  condenser is connected in parallel to another condenser of 8 μF. Both the condensers are then connected in series with a 12 μF  condenser and charged to 20 volts. The charge on the plate of 4 μF condenser is(a) 3.3 μC(b) 40 μC(c) 80 μC(d) 240 μC
       
Direction of the first secondary maximum in the Fraunhofer diffraction pattern at a single slit is given by $($a is the width of the slit$)$
Heavy water is used as moderator in a nuclear reactor. The function of the moderator is(a) To control the energy released in the reactor(b) To absorb neutrons and stop chain reaction(c) To cool the reactor faster(d) To slow down the neutrons to thermal energies
 
 
 
 
When $\sqrt{3}$ ampere current is passed in a tangent galvanometer, there is a deflection of $30^{\circ}$ in it. The deflection obtained when $3$ amperes current is passed, is
The concept of displacement current introduced by Maxwell removes asymmetry between.
In Young's experiment, one slit is covered with a blue filter and the other (slit) with a yellow filter. Then the interference pattern(a) Will be blue(b) Will be yellow(c) Will be green(d) Will not be formed