Give colors of the ring in sequence marked on a resistance of $56 \ k\Omega$ with tolerance $\pm 5\%$
Medium
Download our app for free and get started
For normal incidence path difference between ray $1$ and ray $2$ is $2 \mu_{1}$ t
For minimum thickness increment $2 \mu_{1} \Delta \mathrm{t}=\frac{\lambda}{2}$
$\Rightarrow\left(t_{2}-t_{1}\right)=\frac{\lambda}{4 \mu_{1}}=\frac{9.6 \times 10^{-7}}{4 \times 1.2}=2 \times 10^{-7} \mathrm{\,m}$
$56 \mathrm{\,k} \Omega \pm 5 \%=56 \times 10^{3}\, \Omega \pm 5 \%$
Sequence : Green, Blue, Orange, Golden
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1The specific resistance of manganin is $50 \times {10^{ - 8}}\,ohm \times m$. The resistance of a cube of length $50\,cm$ will beView Solution
- 2View SolutionIn the given circuit diagram the current through the battery and the charge on the capacitor respectively in steady state are
- 3The length of a potentiometer wire is $l$. $A$ cell of $\mathrm{emf}$ $E$ is balanced at a length $l/3$ from the positive end of the wire. If the length of the wire is increased by $l/2$. At what distance will the same cell give a balance point.View Solution
- 4Two bulbs of $100\, W$ and $200\, W$ working at $220$ $volt$ are joined in series with $220$ $volt$ supply. Total power consumed will be approximately ........... $watt$View Solution
- 5An infinite line charge of uniform electric charge density i. lies along the axis of an electrically conducting infinite cylindrical shell of radius $R$. At time $t=0$, the space inside the cylinder is filled with a material of permittivity $\varepsilon$ and electrical conductivity $\sigma$. The electrical conduction in the material follows Ohm's law. Which one of the following graphs best describes the subsequent variation of the magnitude of current censity $j(t)$ at any point in the material?View Solution
- 6Calculate the equivalent resistance between $A$ and $B$View Solution
- 7Incandescent bulbs are designed by keeping in mind that the resistance of their filament increases with the increase in temperature. If at room temperature, $100 \mathrm{~W}, 60 \mathrm{~W}$ and $40 \mathrm{~W}$ bulbs have filament resistances $\mathrm{R}_{100}, \mathrm{R}_{60}$ and $\mathrm{R}_{40}$, respectively, the relation between these resistances isView Solution
- 8Two conductors are made of the same material and have the same length. Conductor $A$ is a solid wire of diameter $1.0\, mm$. Conductor $B$ is a hollow tube of outside diameter $2.0\, mm$ and inside diameter $1.0\, mm$. The resistance ratio $R_A/R_B$ will beView Solution
- 9Two wires of the same material and equal length are joined in parallel combination. If one of them has half the thickness of the other and the thinner wire has a resistance of $8\, ohms$, the resistance of the combination is equal toView Solution
- 10Consider the circuit shown in the figure. The current $I_3$ is equal toView Solution
